Seat Belts
Seat Belt Pre-tensioners
3. With the webbing half unreeled, hold the
tongue plate and pull forward quickly. The
mechanism should lock automatically and
prevent further unreeling.
If a seat belt fails any of these tests, contact
Tesla immediately.
Seat Belt Warnings
WARNING: Seat belts should be worn by
all occupants at all times, even if driving
for a very short distance. Failure to do so
increases the risk of injury or death if an
accident occurs.
The front seat belts are equipped with
pre-tensioners that work in conjunction with
the airbags in a severe frontal collision. The
pre-tensioners automatically retract both the
seat belt anchor and the seat belt webbing,
reducing slack in both the lap and diagonal
portions of the belts, resulting in reduced
forward movement of the occupant. If the
pre-tensioners and airbags did not activate in
an impact, this does not mean they
WARNING: Secure small children in a
suitable child safety seat (see page 9).
Always follow the child safety seat
manufacturer's instructions when installing.
WARNING: Ensure that all seat belts are
worn correctly. An improperly worn seat
belt increases the risk of injury or death if an
accident occurs (see page 6).
malfunctioned. It usually means that the
strength or type of force needed to activate
them was not present.
WARNING: Do not wear seat belts over
hard, fragile or sharp items in clothing,
such as pens, keys, eyeglasses, etc. The
pressure from the seat belt on such items can
cause injury.
WARNING: Once the seat belt
pre-tensioners have been activated, they
must be replaced. After any accident, have the
airbags, seat belt pre-tensioners and any
associated components checked and, if
necessary, replaced.
WARNING: Seat belts should not be worn
with any part of the strap twisted.
WARNING: Each seat belt assembly must
be used by one occupant only. It is
dangerous to put a seat belt around a child
being carried on an occupant’s lap.
Testing Seat Belts
WARNING: Seat belts that have been
worn in an accident must be inspected or
replaced by Tesla, even if damage to the
assembly is not obvious.
To confirm that seat belts are operating
correctly, perform these three simple checks on
each seat belt.
1.
With the seat belt fastened, give the
webbing nearest the buckle a quick pull.
The buckle should remain securely locked.
WARNING: Seat belts that show signs of
wear (such as fraying), or have been cut
or damaged in any way, must be replaced by
Tesla.
2.
With the belt unfastened, unreel the
webbing to its limit. Check that unreeling is
free from snags, and visually check the
webbing for wear. Allow the webbing to
retract, checking that retraction is smooth
and complete.
WARNING: Avoid contaminating a seat
belt’s components with any chemicals,
liquids, grit, dirt or cleaning products. If a seat
belt fails to retract or latch into the buckle, it
must be replaced immediately. Contact Tesla.
WARNING: Do not make modifications or
additions that can prevent a seat belt
mechanism from taking up slack, or that can
SAFETY INFORMATION
7
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Quick Reference Guide |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)