Programming HomeLink®
Please note the following:
Programming
WARNING
Flashing
Before programming HomeLink®
• When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
to a garage door opener or gate
operator, make sure people and
objects are out of the way of the
device to prevent potential harm
•
It is recommended that a new bat-
tery be placed in the hand-held
3
or damage. Do not use the
HomeLink® with any garage door
opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards
(this includes any garage door
transmitter of the device being pro-
grammed to HomeLink® for quicker
training and accurate transmission
of the radio-frequency signal.
•
•
Some vehicles may require the
ignition switch to be placed in the
ODH044413N
opener
model
manufactured
ACC (or "Accessories") position for To train most devices, follow these
before April 1, 1982). A garage
door that cannot detect an object
programming and/or operation of
HomeLink®.
In the event that there are still pro-
gramming difficulties or questions
after following the programming
instructions:
-
signaling the door to stop and
1. For first-time programming, press
and hold the two outside buttons
), HomeLink ® Channel 1
and Channel 3, until the indicator
light begins to flash (after 10 sec-
onds). Release both buttons. Do
not hold the buttons for longer
than 20 seconds.
reverse - does not meet current
U.S. federal safety standards.
Using a garage door opener
without these features increases
the risk of serious injury or
death.
(
,
steps
listed
below,
contact
HomeLink® at: www.homelink.com
or by calling 1-800-355-3515.
3-25
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)