Maintenance
Rear turn signal lamp
5.Insert a new bulb by inserting it into Back up lamp
the socket and rotating it until it
locks into place.
6.Install
the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
7.Install
the service cover by putting
it into the service hole.
Type B
ODH073067L
If the LED lamp does not operate,
ODH073068L
Type A
have the vehicle checked by an Type A
1.Open the trunk.
authorized HYUNDAI dealer.
1.Open
the trunk lid.
2.Open
3.Remove
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
the service cover.
the socket from the
2.Loosen the retaining screw of the
trunk lid cover and then remove the
cover.
3.Remove the socket from the
assembly by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the assembly.
4.Remove
the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
4.Remove the bulb by pulling it
straight out.
5.Insert
a new bulb by inserting it into
the socket and rotating it until it
locks into place.
7-84
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)