Auto up/down window
Automatic reverse
✽ NOTICE
Pressing or pulling up the power win-
dow switch momentarily to the sec-
ond detent position (6) completely
lowers or lifts the window even when
the switch is released. To stop the
window at the desired position while
the window is in operation, pull up or
press down and release the switch.
The automatic reverse feature is
only active when the “Auto Up” fea-
ture is used by fully pulling up the
switch to the second detent.
WARNING
3
Make sure body parts or other
objects are safely out of the way
before closing the windows to
avoid injuries or vehicle damage.
To reset the power windows
If the power windows do not operate
normally, the automatic power win-
ODH043136
Objects less than 0.16 inch (4
mm)
in
diameter
caught
dow system must be reset as follows: If a window senses any obstacle while
between the window glass and
the upper window channel may
not be detected by the automat-
ic reverse window and the win-
dow will not stop and reverse
direction.
1.
Place the Engine Start/Stop button it is closing automatically, it will stop
to the ON position.
and lower approximately 12 inches (30
cm) to allow the object to be cleared.
pulling up on the power window If the window detects the resistance
switch for at least one second.
2.
Close the window and continue
while the power window switch is
pulled up continuously, the window
will stop upward movement then
lower approximately 1 inch (2.5 cm).
If the power window switch is pulled
up continuously again within 5 sec-
onds after the window is lowered by
the automatic window reversal fea-
ture, the automatic window reversal
will not operate.
If the power windows do not operate
properly after resetting, have the
system checked by an authorized
HYUNDAI dealer.
3-41
Product Specification
Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Genesis |
Document File Type | |
Copyright | Attribution Non-commercial |