Maintenance
Brake pads, calipers and rotors
Steering gear box, linkage &
boots/lower arm ball joint
CAUTION
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
The use of a non-specified fluid
could result in transaxle malfunc-
tion and failure.
With the vehicle stopped and engine off,
check for excessive free-play in the
steering wheel.
For more information on checking the
pads or lining wear limit, refer to the
HYUNDAI web site.
Use only
transaxle
specified automatic
fluid.
Check the linkage for bends or damage.
Check the dust boots and ball joints for
(Refer
to
“Recommended lubricants and
capacities” in section 8.)
(http://brakemanual.hmc.co.kr)
deterioration,
cracks,
Replace any damaged parts.
or
damage.
Suspension mounting bolts
Dual clutch transmission fluid
(if equipped)
Drive shafts and boots
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
Check the drive shafts, boots and clamps
for cracks, deterioration, or damage.
Replace any damaged parts and, if nec-
essary, repack the grease.
Inspect the dual clutch transmission fluid
according to the maintenance schedule.
Parking brake
Brake hoses and lines
Inspect the parking brake system
Visually check for proper installation, including the EPB actuator, wiring
and connectors.
Air conditioning refrigerant/
compressor (if equipped)
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
Check the air conditioning lines and con-
nections for leakage and damage.
Brake fluid
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4
specification.
7
55
Product Specification
Categories | Hyundai Manuals, Hyundai i40 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, i40 |
Document File Type | |
Copyright | Attribution Non-commercial |