Maintenance
11.
12.
Connect the headlight bulb socket-
connector.
Install the headlight bulb cover by
turning it clockwise.
✽
NOTICE
We recommend that the headlight aim-
ing be adjusted after an accident or after
the headlight assembly is reinstalled at a
authorized HYUNDAI dealer.
OHD076046
OVF075107K
Turn signal light
WARNING - Halogen bulbs
Follow the steps 1 to 4 from the previous
page.
•
•
Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass if broken.
5. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids. Never touch the glass with
bare hands. Residual oil may cause
the bulb to overheat and burst
when lit. A bulb should be operated
only when installed in a headlight.
6. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
•
•
If a bulb is damaged or cracked,
replace it immediately and carefully
dispose of it.
8. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
Wear eye protection when chang-
ing a bulb. Allow the bulb to cool
down before handling it.
7
102
| Categories | Hyundai Manuals, Hyundai i40 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i40 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)