Maintenance
Headlight (Low/High), static bending
light and turn signal light
Low
1.
2.
3.
Turn off the engine and open the hood.
Remove the front bumper.
Remove the headlight assembly from
the body of the vehicle. If you can
reach the bulb without removing the
headlight assembly, you do not need
to do step 2 and 3.
4.
Disconnect the power connector(s)
from the back of the headlight assem-
bly.
High
static bending
OVF075030
OVF075056K
Headlight, position light, turn sig-
nal light and front fog light bulb
replacement
Headlight (Low/High) and
Static bending light
5. Remove the headlight bulb cover by
turning it counterclockwise.
(1)
Headlight (Low)
Headlight (High, if equipped)
6.
Disconnect the headlight bulb socket-
connector.
- for HID, HID AFLS type
Static bending light
7.
Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
(2)
(3)
Headlight (High)
Flashing headlight
- HID, HID AFLS (if equipped)
Front turn signal light
8.
9.
Pull the bulb out of the socket.
Insert a new bulb into the socket.
(4)
(5)
(6)
(7)
Position light
Dedicated lamp (DRL) (if equipped)
Front fog light (if equipped)
10.
Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
7
101
| Categories | Hyundai Manuals, Hyundai i40 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i40 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)