2015 Hyundai Tucson Owners Manual

Convenient features of your vehicle
5.
Press  and   hold  the   just-trained     Gate operator &  Canadian program-     Reprogramming a single HomeLink
®
button   and  observe
HomeLink
®
ming
button
the red Status Indicator LED. If the
indicator light  stays on constantly,
programming    is  complete    and
your device  should activate  when
®
the  HomeLink   button is  pressed
and released.
During programming,  your handheld     To program  a new device to a  previ-
transmitter  may   automatically  stop     ously trained  HomeLink   button, fol-
®
transmitting.  Continue  to  press  the     low these steps:
Integrated
Control
HomeLink
®
Wireless
1.
Press
and
®
hold
the
desired
System
button     (note
steps  2  through  4 in  the  Standard
HomeLink
button. Do NOT release
until step 4 has been completed.
6.
To  program   the   remaining   two     Programming  portion  of  this   docu-
2.
When the indicator  light begins to
flash  slowly   (after  20  seconds),
position the handheld transmitter 1
HomeLink
®
buttons, follow steps 2      ment) while  you press and  re-press
("cycle")  your  handheld   transmitter
every two seconds until  the frequen-
cy signal has been learned. The indi-
cator light  will flash  slowly and then
rapidly  after  several  seconds  upon
successful training.
through 5.
to
3   inches    away    from    the
®
HomeLink  surface.
3.
Press   and   hold   the   handheld
transmitter button. The HomeLink
®
indicator light will flash, first slowly
and then rapidly.
When the indicator  light begins to
flash rapidly, release both buttons.
Operating HomeLink
To operate, simply press and release
the programmed  HomeLink
®
4.
5.
®
button.
Press  and   hold  the   just-trained
Activation   will  now   occur   for  the
trained   device   (i.e.   garage   door
opener, gate  operator,  security sys-
tem,  entry   door   lock,  home/office
lighting,  etc.). For  convenience,  the
hand-held  transmitter  of the  device
may also be used at any time.
HomeLink
®
button   and  observe
the red Status Indicator LED. If the
indicator light  stays on constantly,
programming    is  complete    and
your new device should activate.
3-52
Product Specification
Categories Hyundai Manuals, Hyundai Tucson Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 653 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Tucson
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field