7.Connect
the other end of the sec- Disconnect the jumper cables in the
Jumper Cables
ond jumper cable to the black, neg- exact reverse order you connected
ative (-) chassis ground of your
vehicle (4).
them:
1.Disconnect
the jumper cable from
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over
the battery when making connec-
tions.
the black, negative (-) chassis
ground of your vehicle (4).
2.Disconnect the other end of the
jumper cable from the black, nega-
tive (-) battery/chassis ground of
the assisting vehicle (3).
3.Disconnect the second jumper
cable from the red, positive (+) bat-
tery/jumper terminal of the assist-
ing vehicle (2).
(-)
(+)
(-)
Jumper Terminal
(+)
8.Start
the engine of the assisting
vehicle and let it run at approxi-
mately 2,000 rpm for a few min-
utes. Then start your vehicle.
Booster Battery
OLMB063002/Q
4.Connect
the jumper cables in the
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+)
jumper terminal of your vehicle (1).
4.Disconnect
the other end of the
If your vehicle will not start after a
few attempts, it probably requires
servicing. In this event please seek
qualified assistance. If the cause of
your battery discharging is not
apparent, have your vehicle checked
the second jumper cable by an authorized HYUNDAI dealer.
black, negative (-)
jumper cable from the red, positive
(+) jumper terminal of your vehicle
(1).
6
5.Connect
the other end of the
jumper cable to the red, positive
battery/jumper terminal of the
assisting vehicle (2).
(+)
6.Connect
the
to
battery/chassis ground of the
assisting vehicle (3).
6-7
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)