66
THINGSTOKNOWBEFORESTARTINGYOURVEHICLE
Stand ard s. The manu factu rer recom mend s that you
try a child restraint in the vehicle seats where you will
use it before you buy it.
belt system will loosen with time, so check the belt
occasionally and pull it tight if necessary.
If the seat belt has a autom atic locking retractor, it will
have a distinctive label. Pull the belt from the retractor
until there is enou gh to allow you to pass throu gh the
child restraint and slide the latch plate into the buckle.
Then, pull the belt until it is all extracted from the
retractor. Allow the belt to retu rn to the retractor,
pulling on the excess webbing to tighten the lap
portion abou t the child restraint. Refer to “Au tom atic
Locking Mod e” earlier in this section.
•
•
•
The restraint must be approp riate for you r child ’s
weight and height. Check the label on the restraint for
weight and height limits.
Carefu lly follow the instru ctions that come with the
restraint. If you install the restraint improp erly, it may
not work when you need it.
The passenger seat belts are equ ipped with either
cinching latch plates or autom atic locking retractors,
which are designed to keep the lap portion tight
arou nd the child restraint so that it is not necessary to
use a locking clip. If the seat belt has a cinching latch
plate, pulling up on the shou lder portion of the
lap/ shou lder belt will tighten the belt. The cinching
latch plate will keep the belt tight, how ever, any seat
•
Buckle the child into the restraint exactly as the
manu factu rer’s instru ctions tell you .
• Whenvehicleyouwithr childthe seatrestraintbelt orisremnotovein uitse,fromsecuthere itvehicle.in the
Do not leave it loose in the vehicle. In a sudden stop or
collision, it could strike the occupants or seat backs
and cause seriou s personal injury.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)