2014-2015 Land Rover Range Rover Handbook Manual

R
Enteringthevehicle
Before operating the tailgate, make
sure that anyone in the vicinity does
not have any part of their body in a
position where it could be trapped.
Note that the ‘soft close’ action does
not incorporate object detection. Death
or serious injury could occur, even with
an object detection system.
2.   Make sure the upper tailgate is stationary
for at least 3 seconds.
3.
4.
To set the opening height: Press and hold
the tailgate close button, mounted on the
upper tailgate, until you hear a chime.
Press and release the tailgate close button
to close the tailgate. Open the tailgate again
to check the upper tailgate opens to the
programmed height.
Object detection while opening: If an object is
detected that would interfere with the tailgate
opening, tailgate movement will stop. Remove
any obstructions and press the tailgate switch
again to open.
Note: If, after performing part 3 of the process
the upper, or upper and lower tailgates close
automatically, the required height has not been
set. Repeat the process ensuring that all steps
are adhered to.
Object detection while closing: If an object is
detected that would interfere with a tailgate
closing, tailgate movement will stop and then
reverse to the fully open position if able to do
so. An audible warning will be given to indicate
a mislock. Remove any obstructions and if the
tailgate is open, press the tailgate switch again
to close the tailgate. If the tailgate is not open,
press a tailgate release switch to open the
tailgate, remove any obstructions. Once the
obstructions have been removed, press the
tailgate close switch to close the tailgate.
To reset the maximum opening height to full,
repeat the process, but manually move the
upper tailgate to the fully open position before
pressing and holding the tailgate close button.
The powered tailgate may lose its position
memory if there are multiple object detections
or if the battery voltage is low. Powered
operation may be inhibited.
To reset the tailgate:
1.
2.
Manually close the tailgate.
Press a tailgate release button.
While the tailgate is open, the locking
platform and latch are exposed. Do not
manually close the latch as it may also
automatically ‘soft close’ and trap items
or body parts.
3.   Allow the tailgate to power fully open or to
the previously set position.
4.
5.
Press and release the tailgate close button.
Allow the tailgate to power close fully.
The tailgate programmed position memory will
now be restored.
TAILGATE OPENING HEIGHT
It is possible to set the maximum height to
which a powered upper tailgate will open. This
is useful in parking areas with very low roofs
or just for ease of use.
REMOTE KEY FOB BATTERY
REPLACEMENT
When the battery needs replacing, there will be
a significant decrease in the effective range and
SMART KEY BATTERY LOW will be displayed
in the Message centre.
1.
Open the upper tailgate to the position you
want to set as the maximum height.
Press either upper tailgate mounted button
to stop movement, or position the upper
tailgate manually.
11
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year2014, 2015
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 309 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Handbook
Product BrandLand Rover
Applicable to CountryBulgaria, International
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2014-2015 Land Rover Range Rover Handbook Manual SKU UPC Model
Lawrence Uzo on Aug 06, 2015. Low to high gear.

I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?