L
Exteriorlights
Unless required or prohibited by law,
daytime running lamps can be
disabled or enabled by a
To manually select high beam, move the stalk
to the high beam position as normal. To return
to High beam assist, move the stalk back to the
central position.
Dealer/Authorised Repairer.
To manually override to low beam from high
beam, pull the stalk to the flash position and
High beam assist will be cancelled. To return to
High beam assist, push the stalk to the high
beam position and then return it to the central
position.
HEADLAMP COURTESY DELAY
This feature operates whenever the following
conditions are met:
•
•
The engine is running.
The headlamp control is in the AUTO
position.
To turn off High beam assist, turn the lighting
control from AUTO to headlamps on.
•
•
The headlamps are on.
This feature can be disabled/enabled using the
Vehicle Set-Up menu (see 46, INSTRUMENT
PANEL MENU).
The ignition is then switched off.
If all conditions are met, the headlamps will
remain illuminated for up to 240 seconds from
the time the ignition is switched off.
The following may affect the operation of High
beam assist:
Note: The time delay may be changed via the
Vehicle Set-Up menu (see 46, INSTRUMENT
PANEL MENU).
•
•
Highly reflective road signs.
Dimly lit road users, for example cyclists or
pedestrians.
•
Adverse weather conditions, for example
fog, heavy rain or snow.
HIGH BEAM ASSIST
This feature automatically selects and deselects
high beam, under specific conditions of road
lighting and in the absence of other vehicle’s
lights. The system is only active when the
ambient light drops below a predetermined
level.
•
•
A dirty or obscured sensor.
A dirty, damaged, or misted windscreen.
Note: The system cannot be relied upon to
activate or deactivate high beam in all possible
circumstances. It remains the driver’s
responsibility to make sure correct use of the
headlamps at all times.
Note: It is not recommended that High beam
assist is used while driving off road.
Note: Make sure that the sensor on the back of
the rear view mirror is not blocked or
obstructed.
See 52, HIGH BEAM ASSIST (GREEN).
For High beam assist to become operational,
the lighting control must be in the AUTO
position, with low beam headlamps selected.
See 53, LIGHTING CONTROL.
ADAPTIVE FRONT LIGHTING SYSTEM
(AFS)
The system will only activate when the vehicle
speed exceeds 40 km/h (25 mph). The system
will deactivate when vehicle speed drops below
When cornering using low beam, AFS will adjust
the headlamp beams to provide improved
illumination in the direction of travel.
24
km/h (15 mph).
AFS is deactivated when:-
54
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews. I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?