L
Adaptivecruisecontrol
Note: Follow mode is an integral function of
ACC. You cannot disengage follow mode and
still use cruise control to maintain your speed.
•
You change lane to either side or enter an
exit lane.
The driver should intervene if appropriate.
Once a set speed has been selected, the driver
can release the accelerator and the set road
speed will be maintained.
If a direction indicator is used, ACC will reduce
the gap to the vehicle ahead so as to respond
more quickly to the anticipated manoeuvre. If
a manoeuvre is not actioned, the previous gap
will be restored after a few seconds. Enhanced
response may not occur if ACC detects that it
is inappropriate, i.e., you are already too close
to the vehicle ahead or you are already in
another lane.
If a vehicle ahead enters the same lane or a
slower vehicle is ahead in the same lane, your
vehicle speed will adjust automatically until the
gap to the vehicle ahead corresponds to the gap
setting. The vehicle is now in follow mode. See
51,
FOLLOW MODE (AMBER).
The Message centre will display the gap set in
the form of a vehicle with a varying number of
bars in front of it.
CHANGING THE FOLLOW MODE SET
GAP
The vehicle will then maintain the constant time
gap to the vehicle ahead until:
It is the driver’s responsibility to select
a gap appropriate to the driving
conditions.
•
•
•
The vehicle ahead accelerates to a speed
above the set speed.
4
gap settings are available. The selected gap
setting is displayed on the Message centre when
the gap adjustment buttons are operated.
The vehicle ahead moves out of lane or out
of view.
A new gap setting is chosen.
Each gap is indicated by an additional bar in
front of the vehicle icon in the Message centre.
After the ignition is switched on, the default gap
(gap 3) will be automatically selected ready for
ACC operation.
If necessary, the vehicle brakes will be
automatically applied, slowing the vehicle and
maintaining the gap to the vehicle in front.
The maximum braking which is applied by ACC
is limited and can be overridden by the driver
applying the brakes, if required.
If Terrain response Grass-Gravel-Snow mode
is selected then the longest gap (gap 4) will
initially be selected.
Note: Driver braking will cancel ACC.
If ACC predicts that its maximum braking level
will not be sufficient, then an audible warning
will sound while ACC continues to brake.
DRIVER INTERVENE will be displayed in the
Message centre. Take immediate action.
OVERRIDING THE SPEED AND
FOLLOW MODE
Whenever the driver is overriding the
ACC by pressing the accelerator pedal,
the ACC will not automatically apply
the brakes to maintain separation from
any vehicle ahead.
When in follow mode, the vehicle will
automatically return to the set speed when the
road ahead is clear, for instance when:
•
The vehicle ahead accelerates to a speed
above the set speed, or changes lane.
136
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2014-2015 Land Rover Range Rover Handbook Manual 3.0 out of 3.0 based on 1 product reviews. I stopped to buy fuel. On shifting to D to move, my range rover could not move, but low gear light continued to blink. The low gear button remained stiff. What is wrong?