11.
Install spare wheel on wheel
hub. Insert wheel bolts and
tighten them slightly.
To avoid paint damage, place
wheel flat against hub and hold it
there while installing first wheel
bolt.
13. Fold wrench together and
tighten the five bolts evenly,
following the sequence
illustrated above, until all bolts
are tight.
Observe a tightening torque of 110
Nm (80 ft. lb.).
Before storing the jack, the jack arm
must be lowered almost to the base of
the jack.
Warning!
Incorrect mounting bolts or
improperly tightened mounting bolts
can cause the wheel to come off. This
could cause an accident Be sure to
use the correct mounting bolts.
Unscrew the alignment bolt to
install the last wheel bolt.
14. Correct tire pressure.
Important!
12.
Lower car. Remove jack and
insert jack tube cover.
When installing new wheels the
mounting bolts must be retightened
after approx. 100 to 500 km (60 - 300
miles).
101
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 500 SEC, Mercedes-Benz 600 SEC, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)