Warning!
Adding Coolant.
•
Use extreme caution when
opening the hood if there are any
signs of steam or coolant leaking
from the cooling system.
If coolant has to be added, a 50/50
mixture of water and MB anticorrosion/
antifreeze should be added.
The drain plugs for the cooling system
are located on the right and left sides of
the engine block and at the bottom of
the radiator.
•
Do not remove pressure cap on
coolant reservoir if engine
temperature is above 194°F
(90°C).
Allow engine to cool down
before removing cap. The coolant
reservoir contains hot fluid and is
under pressure,.
Anticorrosion/antifreeze, see
Coolants in Index.
•
•
Using a rag, turn cap to first notch
to relieve excess pressure. If
opened immediately, scalding hot
fluid and steam will be blown out
under pressure, possibly causing
personal injury.
Coolant reservoir of 600 SEC shown
Checking Coolant Level
To check the coolant level, the vehicle
must be parked on level ground and the
engine stopped.
Do not spill antifreeze on hot
engine parts. Antifreeze contains
ethylene glycol which may burn if
it comes into contact with hot
engine parts. You can be seriously
burned
Checkcoolantlevelonlywhencoolant is
cold.
The coolant should reach the top of the
tab inside the filler neck.
93
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 500 SEC, Mercedes-Benz 600 SEC, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)