Coolants
heat transfer capability of the solution.
Therefore, do not use more than this
amount of anti-corrosion/antifreeze.
Therefore the following product is
strongly recommended for use in your
car: Mercedes-Benz Anticorrosion/
Antifreeze Agent.
The engine coolant is a mixture of water
and anticorrosion/anti-freeze, which
provides:
If the coolant level is low, water and
MB anticorrosion/antifreeze should be
used to bring it up to the proper level
(have cooling system checked for signs
of leakage).
Before the start of the winter season (or
once a year in the hot southern regions),
you should have the anticorrosion/
antifreeze concentration checked. The
coolant is also regularly checked each
time you bring your vehicle to your
authorized Mercedes-Benz dealer for
maintenance service.
•
•
boiling protection (by increasing
the boiling point).
corrosion protection
freeze protection
The water in the cooling system must
meet minimum requirements, which are
usually satisfied by normal drinking
water. If you are not sure about the
water quality, consult your authorized
Mercedes-Benz dealer.
The cooling system was filled at the
factory with a coolant providing freeze
protection to approx. -22 °F (-30 °C) and
corrosion protection.
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase in the boil-over
protection. You should have it replaced
every 3 years.
Anticorrosion/antifreeze quantity
Anticorrosion/antifreeze
Model
Approx.
freeze
Your vehicle contains a number of
aluminum parts. The use of aluminum
components in motor vehicle engines
necessitates that anticorrosion/
antifreeze coolant used in such engines
be specifically formulated to protect the
aluminum parts. (Failure to use such
anticorrosion/antifreeze coolant will
result in a significantly shortened
service life.)
-35 ° F
-49 °F
(-37
°C)
(-45 °C)
To provide the important corrosion
protection, the solution must be at least
SEC 500
SEC 600
8.2 US qt
9.0 US qt
4
5% anticorrosion/antifreeze (equals a
(7.25 l)
10.6 US qt
(8.50 l)
11.6US qt
freeze protection to approx. -22 °F [-30
°C]). If you use a solution that is more
than 55% anticorrosion/antifreeze (freeze
protection to approx. -49 °F [-45°C]), the
engine temperature will increase due to
the lower
(10.00
l)
(11.00 l)
134
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 500 SEC, Mercedes-Benz 600 SEC, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)