Windshield Washer Fluid Mixing
Ratio
Blocked Windshield Wiper
Signaling Turns with Hazard
Flasher in Use
If the windshield wiper becomes
blocked (for example, due to snow),
switch off the wiper motor.
For temperatures above freezing:
For example, when the vehicle is
being towed:
MB Windshield Washer Concentrate
"S" and water 1 part "S" to 100 parts
water (40 ml "S" to 1 gallon water).
For safety reasons before removing ice
or snow, remove key from steering
lock. Remove blockage.
With hazard flasher on, activate
combination switch for left or right
turn signal - only the selected turn
signal will blink.
For temperature below freezing:
Activate combination switch again
(key in steering lock position 1).
MB Windshield Washer Concentrate
"S" and commercially available
premixed windshield washer
solvent/antifreeze
Upon canceling the turn signal, all four
turn signals will operate again.
Emergency Operation of
Windshield Wiper
Turn Signal Failure
1
part "S" to 100 parts solvent (40 ml
In case of windshield wiper
malfunction, turn combination switch
to wiper setting II.
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster than normal rate. In
addition, the exterior lamp failure
indicator will come on.
"S" to 1 gallon solvent),
Windshield Wiper Smears
Have the system checked at your
authorized MERCEDES-BENZ dealer
as soon as possible.
If the windshield wiper smears the
windshield, even during rain, activate
the washer system as often as
necessary. The fluid in the washer
reservoir should be mixed in the correct
ratio.
57
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 500 SEC, Mercedes-Benz 600 SEC, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)