Important!
Warning!
Important!
5.
Start engine of the vehicle with
Never lean over batteries while
connecting or jump starting,
you might get injured.
A discharged battery can freeze at
approx. + 14°F (-10°C). In that case, it
must be thawed out before jumper
cables are used.
the charged battery and run at
high idle. Then start engine of
the disabled vehicle in the
usual manner.
Battery fluid contains sulfuric acid.
Do not allow this fluid to come in
contact with eyes, skin or clothing. In
case it does, immediately flush
affected area with water, and seek
medical help.
Jumper cable specifications:
6.
After the engine has started,
remove jumper cables by
• Minimum cable cross-section of
exactly reversing the above
installation sequence, starting
with the last connection made
first. When removing each
clamp, make sure that it does
not touch any other metal while
the other end is still attached.
25 mm or approx. 2 AWG
2
• Maximum length of 11.5 ft.
(3.5 m).
A battery will also produce hydrogen
gas, which is flammable and very
explosive. Keep flames or sparks
away from battery, avoid improper
connection of jumper cables,
smoking etc..
110
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 500 SEC, Mercedes-Benz 600 SEC, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)