1995 Land Rover Range Rover Classic Manual

ENGINE
2.
3.
If only new piston rings are to be fitted, break
cylinder bore glazing using a fine grit, to
produce a 60° cross-hatch finish. Ensure all
traces of grit are removed after above
operation.
Cylinder liner bore - inspection
Check alignment of connecting rods.
1.
Measure cylinder liner bore wear and ovality in
two axis 40 to 50 mm (1.5 to 1.9 in) from top of
bore.
Cylinder liner bore:
Grade ’A’ piston fitted = 94.00 to 94.015 mm
(3.700
to 3.701 in)
Grade ’B’ piston fitted = 94.016 to 94.030 mm
to 3.702 in)
(3.7014
Maximum ovality = 0.013 mm (0.0005 in)
Cylinder liners having grade ’A’ pistons fitted
may be honed to accept grade ’B’ pistons
provided specified wear and ovality limits are
maintained.
CAUTION: The temperature of piston and
cylinder block must be the same to ensure
accurate measurement.
30
OVERHAUL
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 75 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field