Warning!
Always replace wheel bolts that are
damaged or rusted.
Never apply oil or grease to wheel
bolts.
Damaged wheel hub threads should
be repaired immediately.
Incorrect mounting bolts or
improperly tightened mounting bolts
can cause the wheel to come off. This
could cause an accident. Be sure to
use the correct mounting bolts.
5.
Remove the protective cover from
the jack support tube opening by
inserting a screw driver in the
opening and prying it out.
7. Jack up the vehicle until the wheel
is clear of the ground. Never start
engine while vehicle is raised.
8.
Unscrew upper- most wheel bolt
and install alignment bolt (1)
The tube openings are located
directly behind the front wheel
housings and in front of the rear
wheel housings.
supplied in the tool kit. Remove the
remaining bolts. Keep bolt threads
protected from dirt and sand.
6.
Insert jack arm fully into the tube
hole up to the stop. Place jack on
firm ground. Position the jack so that
it is always vertical (plumb-line) as
seen from the side (see arrow), even
if the vehicle is parked on an
incline.
9. Remove wheel. Grip wheel from the
sides. Keep hands from beneath the
wheels.
100
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free Auto PDF Vehicle Owner's Manual Download |
| Tags | Mercedes-Benz S500, Mercedes-Benz S600, Mercedes-Benz W140 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)