Warning!
Adding Coolant.
•
Use extreme caution when opening
the hood if there are any signs of
steam or coolant leaking from the
cooling system.
If coolant has to be added, a 50/50
mixture of water and MB
anticorrosion/antifreeze should be
added.
•
Do not remove pressure cap on
coolant reservoir if engine
temperature is above 90°C
The drain plugs for the cooling system
are located on the right and left sides of
the engine block and at the bottom of
the radiator.
(194°F).
Allow engine to cool down
before removing cap. The coolant
reservoir contains hot fluid and is
under pressure.
Anticorrosion/antifreeze, see
Coolants in Index.
•
•
Using a rag, turn cap to first notch
to relieve excess pressure. If
opened immediately, hot scalding
fluid and steam will be blown out
under pressure, possibly causing
personal injury,
Coolant reservoir of S 600 shown
Checking Coolant Level
To check the coolant level, the vehicle
must be parked on level ground and the
engine stopped.
Do not spill antifreeze on hot
engine parts. Antifreeze contains
ethylene glycol which may burn if
it comes into contact with hot
engine parts. You can be seriously
burned.
Check coolant level only when coolant
is cold.
The coolant should reach the top of the
tab inside the filler neck.
93
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free Auto PDF Vehicle Owner's Manual Download |
| Tags | Mercedes-Benz S500, Mercedes-Benz S600, Mercedes-Benz W140 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)