6.
After the engine has started, remove
jumper cables by exactly reversing
the above installation sequence,
starting with the last connection
made first. When removing each
clamp, make sure that it does not
touch any other metal while the
other end is still attached.
Towing the Vehicle
The rear towing eye is located at the
right, below the bumper. The front
towing eye is located on the passenger
side behind a flap in the bumper panel.
Flap removal: Insert finger in recess of
flap and pull flap out.
Important!
Flap installation: Engage flap at
bottom and press in top securely. We
recommend that the vehicle be
transported using flat bed equipment.
This method is preferable to other
types of towing.
A discharged battery can freeze at
approx. + 14°F (-10°C). In that case, it
must be thawed out before jumper
cables are used. A frozen battery can
explode and cause personal injury.
Jumper cable specifications:
•
Minimum cable cross-section of 25
or approx. 2 AWG
mm
2
•
Maximum length of 11.5 ft.
(3.5
m).
111
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free Auto PDF Vehicle Owner's Manual Download |
| Tags | Mercedes-Benz S500, Mercedes-Benz S600, Mercedes-Benz W140 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)