Fuel Requirements
The ratio of Methanol to gasoline must
not exceed 3% plus additional
cosolvents.
Gasoline Additives
Use only Premium unleaded meeting
ASTM standard D 439:
A major concern among engine
manufacturers is carbon build up
caused by gasoline. Mercedes-Benz
recommends to use only quality
gasoline containing additives that
prevent the build up of carbon deposits.
Using mixtures of Ethanol and
Methanol is not allowed. Gasohol,
which contains 10% Ethanol and 90%
unleaded gasoline, can be used.
The octane number (posted at the
pump) must be 91min. It is an average
of both, the Research (R) octane
number and the Motor (M) octane
number: [(R + M)/2]. This is also
known as ANTI-KNOCK INDEX.
These blends must also meet all other
fuel requirements such as resistance to
spark knock, boiling range, vapor
pressure etc..
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake
valves and in the combustion area,
leading to engine performance
problems such as:
Unleaded gasoline containing
oxygenates such as Ethanol, I PA, IBA
and TBA can be used provided the ratio
of any one of these oxygenates to
gasoline does not exceed 10%, MTBE
not to exceed 15%.
•
•
•
•
•
warm-up hesitation,
unstable idle,
knocking/pinging,
misfire,
power loss.
Do not blend other specific fuel
additives with fuel. They only result in
unnecessary cost, and may be harmful
to the engine operation.
Damage or malfunctions resulting
from poor fuel quality or from
blending specific fuel additives are not
covered by the Mercedes-Benz
Limited Warranty.
134
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free Auto PDF Vehicle Owner's Manual Download |
| Tags | Mercedes-Benz S500, Mercedes-Benz S600, Mercedes-Benz W140 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)