Workshop maintenance
TRANSFER GEARBOXOILRENEWAL
•
•
•
Clean the thread of the drain plug then
apply Loctite 290 to the thread.
WARNING
Refit the plug with a new washer. Tighten
to a torque of 30 Nm.
For safety, DONOTwork underneath the
vehicle unless it is safely parked with the
wheels chocked, or is supported by heavy
duty stands.
Inject the correct grade of oil (see ’General
data’) until it is levelwith the bottom of the
filler levelhole.
Extreme care should be taken when draining
gearbox oil, it may be hot and cause severe
scalding.
WARNING
Use only NEWoil - DONOTuse oil
previously drained from the system.
Ensure the vehicle is parked on firm, level
ground and chock the wheels. Place a suitable
container under the gearboxto catch the used
oil.
•
•
•
Clean the thread of the filler levelplug,
then apply Loctite 290 to the thread.
Refit the filler levelplug and tighten to a
torque of 25 Nm.
Wipe any surplus oil from the area and
remove the wheel chocks.
•
Clean the area surrounding the drain plug
(2) and filler level(3) plug, to prevent
contamination of the gearbox.
•
•
Remove the filler levelplug.
Remove the drain plug (2) and allow the
oil to drain completely.
112
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Language | English |
| Product Name | Defender 90, 110, 130 |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)