DO-IT-YOURSELF MAINTENANCE
NOTE:
Tightening torque .............. 12-16 Nm
(120-160 kg.cm, 9-12 lb.ft)
Always dispose of used engine oil in an
environmentally acceptable manner. It is sug-
gested that it be placed in a sealed container
and taken to a service station for reclama-
tion. Do not pour the oil on the ground or
put it into the household trash.
SST (09263-02000)
WARNING:
Used motor oil may cause irritation or can-
cer of the skin if left in contact with the skin
for prolonged periods of time. Wash your
hands thoroughly with soap and warm wa-
ter as soon as possible after handling used
oil.
G040A05X
8.
Before installing the new oil filter on the
engine, apply clean engine oil to the surface
of the rubber gasket.
Extension bar
G040A04X
Temporarily tighten the oil filter by hand.
NOTE:
G050A01A-AAT
CHECKING AND CHANGING THE EN-
GINE COOLANT
o
Be careful not to drop the engine oil on
the rubber parts of the engine mounting
insulator.
WARNING:
o
o
You can purchase the SST from your
Hyundai dealer.
If you aren't sure how to use, consult
your Hyundai dealer.
Do not remove the radiator cap when the
engine is hot. When the engine is hot, the
engine coolant is under pressure and may
erupt through the opening if the cap is
removed. You could be seriously burned if
you do not observe this precaution. Do not
remove the radiator cap until the radiator is
cool to the touch.
10.Refill the crankcase with the recommended
engine oil. Refer to the specification in chap-
ter 9 for engine oil capacity.
G040A06X
11.Start
the engine and check to be sure no oil
is leaking from the drain plug or oil filter.
12.Shut off the engine and recheck the oil level.
9.
Using the special tool (09263-02000) and
torque wrench, tighten the oil filter to the
specified torque.
6-5
Categories | Hyundai Manuals, Hyundai Atos Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Atos |
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)