FEATURES OF YOUR HYUNDAI
B922B03X-GAT
3. BASS/TREBLE Control Knob
6. PRESET STATION SELECT Button
Six(6)stationsforAM,FMandFM2respectively
canbepresetintheelectronicmemorycircuiton
this unit.
1.
POWER ON-OFF/VOLUME
CONTROL KNOB
BASS Control Knob
Press to pop the knob out and turn to the left or
right for the desired bass tone.
Theradiounitmaybeoperatedwhentheignition
key is in the "ACC" or "ON" position. The clock
will be displayed automatically, although the ra-
dio unit has gone out. Press the button to switch
the power on. The LCD shows the radio fre-
quencyintheradiomodeortheCDtrackindica-
tor in the CD mode. To switch the power off,
press the button again.
HOW TO PRESET STATIONS
TREBLE Control Knob
Further pull-lock position of popped-up knob.
Turntotheleftorrightforthedesiredtrebletone.
Six AM and twelve FM stations may be pro-
grammedintothememoryoftheradio.Then,by
simply pressing the band select button and/or
one of the six station select buttons, you may
recallanyofthesestationsinstantly.Toprogram
the stations, follow these steps:
4.
BAND Selector
Pressing the FM/AM button changes the AM, FM1
andFM2bands.Themodeselectedisdisplayed
on LCD.
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to re-
duce the volume.
o
o
o
o
Press band selector to set the band for AM,
FM, and FM2.
Select the desired station to be stored by
seek, scan or manual tuning.
5.
TUNE (Manual) Select Button
Press the (+) side or (-) side to increase or to
decrease the frequency. With the button held
downfor0.5sec.ormore,thestopsignal(broad-
casting radio wave) is ignored and channel se-
lectioncontinues.
BALANCE Control
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory. You should then release the
button, and proceed to program the next
desired station. A total of 18 stations can be
programmed by selecting one AM and one
FM station per button.
Pull and turn the control knob clockwise to em-
phasizerightspeakersound.(Leftspeakersound
will be attenuated) When the control knob is
turnedcounterclockwise,leftspeakersoundwill
be emphasized. (Right speaker sound will be
attenuated)
SEEK Operation (Automatic Channel
Selection)
Press the TUNE select button 1 sec. or more,
and releasing will automatically tune the next
available station. When the (+) side is pressed
longerthan1secondandreleasingwillautomat-
ically tune the next higher frequency and when
the (-) side is pressed longer than 1 second and
releasing will automatically tune the next lower
frequency.
2.
FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speaker
soundwillbeattenuated)Whenthecontrolknob
is turned clockwise, rear speaker sound will be
emphasized.(Frontspeakersoundwillbeatten-
uated)
o
When completed, any preset station may be
recalled by selecting AM, FM or FM2 band
and the appropriate station button.
1-
48
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)