DRIVING YOUR HYUNDAI
C090C01A-AAT
C090G01S-GAT
o
o
o
Do not accelerate the engine in reverse
or any of the forward positions with the
brakes applied.
Always apply the footbrake when shift-
ing from "P" or "N", to "R", "D", "2" or
"L" position.
Do not use the "P" (Park) position in
place of the parking brake. Always set
the parking brake, shift the transaxle into
"P" (Park) position and turn off the igni-
tion when you leave the vehicle, even
momentarily. Never leave the vehicle
unattended while the engine is running.
Check the automatic transaxle fluid level
regularly, and add fluid as necessary.
o R(Reverse):
o L (Low gear):
Use for backing up the vehicle. Bring the car to
a complete stop before shifting the selector
lever to "R" position.
Use for driving up a very steep grade or for
engine braking when descending steep hills.
When downshifting to "L", the transaxle will
temporarily remain in second gear until the
vehicle has slowed enough for low gear to
engage. Do not exceed 50 km/h (30 mph) in low
gear.
"L" shifts to 1st gear only. However, shift up to
2nd is performed when the car exceeds a
certain speed and, as speed increases, the
transaxle will shift up to 3rd gear to prevent
over-revving the engine.
C090D02A-AAT
o N (Neutral):
In the "N" position, the transaxle is in neutral
position, which means that no gears are en-
gaged. The engine can be started with the shift
lever in "N" position, although this is not recom-
mended except if the engine stalls while the car
is moving.
o
C090E01A-GAT
C090H01E-GAT
o D (Drive):
NOTE:
C090P01A-GAT
Use for normal driving. The transaxle will auto-
matically shift through a four-gear sequence,
giving best economy and power. Never down-
shift manually to "2" position or "L" position
when vehicle speed is more than 95 km/h (60
mph).
o
o
o
For smooth and safe operation, depress
the brake pedal when shifting from "Neu-
tral" position or "Park" position to a for-
ward or reverse gear.
The brake pedal fully depressed in order
to move the shift lever from the "P"
(Park) position to any of the other posi-
tions.
It is always possible to shift from "R",
"N", "D", "2", "L" position to "P" posi-
tion. The vehicle must be fully stopped to
avoid transaxle damage.
Overdrive Switch
C090F01A-AAT
o 2 (Second gear):
Use for driving on a slippery road, hill climbing
or engine braking downhill. "2" automatically
shifts between first and second gears.
This means that no shift-up to 3rd gear is
performed. However, the shift-up to third gear is
done when the car speed exceeds a certain
value to prevent the engine from over-revving.
Manually move the selector to "D" returning to
normaldrivingcondition.
C090P01X
C090I01E-AAT
CAUTION:
o
When the overdrive switch is turned on, the
transaxle will automatically upshift to the sec-
ond, third and overdrive gears. When the over-
Shift into "R" and "P" position only when
the vehicle has completely stopped.
2-
6
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)