Controls in detail
Transfer case
̈
Press upper half 1 (“LOW”) of the
̈ Put gear selector in D.
ț TC SHIFT – CANCELLED
transfer case switch.
The shift did not take place.
Messages in the multifunction display
Once the shift is complete, gear
position L is displayed in the transfer
case indicator.
̈
Repeat the shift procedure.
If a shift was not completed and the multi-
function display shows one of the following
messages:
ț TRANSFER CASE – VISIT WORKSHOP!
There is a malfunction in the system.
̈
Put gear selector in D.
ț TC SHIFT CONDITIONS NOT FULFILLED
̈
Have the vehicle checked at your au-
thorized Mercedes-Benz Light Truck
Center as soon as possible.
Switching from LOW to HIGH
The shift does not occur. At least one
shift condition was not met.
!
The shift procedure can only be per-
formed when:
̈ Repeat the shift procedure.
ț TC IN NEUTRAL
i
If the SmartKey is in starter switch
position 0 or 1, an alarm will sound if
the transfer case is in position N and
the driver’s door is opened.
ț
ț
The engine is running.
The shift does not occur. The transfer
case is in neutral. The gear position N
is displayed in the transfer case
indicator 1.
The selector lever for the automatic
transmission is in position N.
Engage transfer case to gear position
HIGH or LOW.
ț
The vehicle speed does not exceed
40 mph (70 km/h).
̈ Repeat the shift procedure.
G
More information can be found in the
“Practical hints” section (୴ page 266).
̈
Press lower half 2 (“HIGH”) of the
transfer case switch.
Warning!
If TC is in neutral, transmission position P
will not hold vehicle. The parking brake must
be applied to hold vehicle in place.
Once the shift is complete, gear
position H is displayed in the transfer
case indicator.
142
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)