Practical hints
Where will I find ...?
Vehicle jack
CD-changer
Warning!
G
The vehicle jack is under the rear bench
seat.
The CD-changer is located on the left side
of the cargo compartment.
The jack is designed exclusively for jacking
up the vehicle under the axle housing. To
help avoid personal injury, use the jack only
to lift the vehicle during a wheel change.
Never get beneath the vehicle while it is sup-
ported by the jack. Keep hands and feet
away from the area under the lifted vehicle.
Always firmly set parking brake and block
wheels before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Make sure that the jack is
positioned correctly under the axle housing.
Always lower the vehicle onto sufficient ca-
pacity jackstands before working under the
vehicle.
1
2
3
Cover
CD-changer
Tab
i
For CD-changer instructions, see sepa-
rate COMAND operator’s manual.
Vehicle jack
̈
Fold the rear bench seat forward
(୴ page 170).
̈
̈
Open cover 1.
Open tab 2 and remove vehicle jack 3.
Please also observe the safety guidelines
in the “Flat tire” section (୴ page 290)
when using the jack.
269
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)