Practical hints
Flat tire
Lowering the vehicle
̈ Tighten the five wheel bolts evenly, fol- ̈ Press the jack piston in again and close
lowing the diagonal sequence illustrat- the lowering screw. Store the jack
ed (1 to 5), until all bolts are tight. (୴ page 269) and the other vehicle
Observe a tightening torque of 97 ft lb tools (୴ page 268).
̈
Using the pump lever, open the lower-
ing screw on the jack approximately
one turn (୴ page 292).
(130
Nm).
̈
After changing the wheel, secure the
faulty wheel on the spare wheel mount-
ing bracket (୴ page 271). Make sure
that the wheel cannot come loose.
The vehicle is resting fully on its own
weight.
Warning!
G
̈
Remove the jack.
Have the tightening torque checked after
changing a wheel as soon as possible. The
wheels could come loose if they are not
tightened to a torque of 97 ft lb (130 Nm).
After use, disassemble pump handle
̈
Check the tire inflation pressure and
correct it if necessary.
(
୴ page 292) and store jack in the des-
ignated storage compartment
A table with the tire pressure values for
your vehicle is located on the fuel filler
flap.
(
୴ page 269).
1
- 5 Wheel bolts
294
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)