Operation
Maintenance
Calling up the service indicator
Resetting the service indicator
i
If the service indicator was inadvertent-
ly reset, have a Mercedes-Benz Light
Truck Center correct it.
̈
Switch ignition on.
In the event that the service on your vehi-
cle is not carried out by an authorized
Mercedes-Benz Light Truck Center, you
can reset the service indicator yourself.
The standard display of the control sys-
tem appears (୴ page 111).
Only reset if the proper service has
been performed. Resetting the system
without performing proper service as
called for by the FSS will cause the FSS
to incorrectly determine the next ser-
vice interval which will result in engine
damage not covered by the Mer-
̈
Press button k or j on the mul-
tifunction steering wheel until the FSS
indicator appears in the multifunction
display.
̈
Switch ignition on.
The standard display of the control sys-
tem appears (୴ page 111).
̈
Press button k or j on the mul-
tifunction steering wheel until the FSS
indicator appears in the multifunction
display.
i
If the vehicle battery is disconnected,
the days of disconnection will not be in-
cluded in the count shown by the ser-
vice indicator. To arrive at the true
service deadline, you will need to sub-
tract these days from the days shown
in the service indicator.
cedes-Benz Limited Warranty.
̈ Press the reset knob (୴ page 230) for
about four seconds.
This message appears in the tachome-
ter:
Do not confuse the service indicator
with the engine oil level indicator :.
DO YOU WANT TO RESET SERVICE INTER-
VAL? CONFIRM BY PRESSING R
̈
To confirm, hold down the reset knob
(୴ page 230) until you hear a signal.
The service indicator now displays the
reset interval.
231
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)