Controls in detail
Useful features
i
Programming or reprogramming the in-
tegrated remote control
̈ When the indicator lamp flashes rapid-
ly, release both buttons.
For operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
̈
Turn key in the starter switch to
position 1 or 2.
̈ To program the remaining two buttons,
repeat the above steps.
̈
Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
i
(1) This device may not cause harmful
If, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature”.
interference, and
12
cm) away from the surface of the in-
(2)
this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.
̈
̈
Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.
192
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)