7.
8.
Firmly press and release the “Learn” or “Smart”
button. The name and color of the button may
vary by manufacturer.
Gate Operator and Canadian
Programming
You will have 30 seconds to start Step 8.
Canadian radio-frequency laws require transmitter
signals to “time out” or quit after several seconds of
transmission. This may not be long enough for
HomeLink to pick up the signal during programming.
®
Similarly, some U.S. gate operators are manufactured to
“time out” in the same manner.
Return to the vehicle. Firmly press and hold the
programmed HomeLink button for two seconds,
®
then release. Repeat the press/hold/release
sequence a second time, and depending on the
brand of the garage door opener (or other rolling
code device), repeat this sequence a third time
to complete the programming.
If you live in Canada, or you are having difficulty
programming a gate operator by using the
“Programming HomeLink ” procedures (regardless of
®
where you live), replace Step 3 under “Programming
” with the following:
HomeLink
®
should now activate your rolling-code
equipped device.
HomeLink
®
To program the remaining two HomeLink buttons,
®
begin with Step 2 of “Programming HomeLink .” Do not
®
repeat Step 1.
Continue to press and hold the HomeLink button while
®
you press and release every two seconds (cycle)
your hand-held transmitter until the frequency signal has
been successfully accepted by HomeLink
indicator light will flash slowly at first and then rapidly.
®
Proceed with Step 4 under “Programming HomeLink ”
to complete.
®
. The
2-43
| Categories | Cadillac Manuals, Cadillac SRX Manuals |
|---|---|
| Tags | Cadillac SRX 3.6, Cadillac SRX 4.6 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)