6.
If you are replacing the fog lamp bulb, disconnect
the electrical connector from the back of the bulb
socket.
3. Rotate the front sidemarker socket one-eighth turn
counterclockwise to remove it.
4.
Replace the bulb. See Replacement Bulbs on
page 5-55 for the proper bulb number.
7.
8.
9.
Turn the bulb socket one-quarter turn
counterclockwise to remove it from the assembly.
5.
6.
Reinstall the socket to the headlamp assembly.
Replace the bulb. See Replacement Bulbs on
page 5-55 for the proper bulb number.
Replace the fasteners that attach the front fascia
extension panel in the wheelhouse.
Reverse Steps 1 through 7 to reinstall the bulb
socket and access cap.
Center High-Mounted Stoplamp
(CHMSL)
Sidemarker Lamps
It is recommended that this component be replaced as
a unit. See your dealer.
This procedure is for replacing the sidemarker bulb only.
If you need to replace the parking lamp bulb or
halogen headlamp as well, see Headlamps, Sidemarker,
and Parking Lamps on page 5-51.
Taillamps, Turn Signal, Stoplamps
and Sidemarker Lamps
1.
Use a tool to remove the fasteners that attach the
front fascia extension panel in the wheelhouse.
It is recommended that this component be replaced as
a unit. See your dealer.
2.
Reach forward past the wheelhouse to the front
sidemarker socket in the outboard side of the
headlamp assembly.
5-54
| Categories | Cadillac Manuals, Cadillac SRX Manuals |
|---|---|
| Tags | Cadillac SRX 3.6, Cadillac SRX 4.6 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)