Windshield Washer Fluid
What to Use
Open the cap with the
washer symbol on it.
Add washer fluid until
the tank is full.
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will
be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Notice:
•
Adding Washer Fluid
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
The Check Washer Fluid message will appear on the
DIC when the fluid level is low. See DIC Warnings and
Messages on page 3-65 for more information.
•
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
The windshield washer fluid reservoir is located on the
passenger’s side of the vehicle near the front of the
engine compartment. See Engine Compartment
Overview on page 5-12 for more information on location.
•
•
Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-37
| Categories | Cadillac Manuals, Cadillac SRX Manuals |
|---|---|
| Tags | Cadillac SRX 3.6, Cadillac SRX 4.6 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)