WHAT TO DO IN AN EMERGENCY 3- 9
with the studs and slide the wheel onto
them. If this is difficult, tip the wheel
slightly and get the top hole in the
wheel lined up with the top stud. Then
jigglethewheelbackandforthuntilthe
wheel can be slid over the other studs.
D060H01A-AAT
7.
Reinstall Wheel Nuts
!
WARNING:
Wheel covers may have sharp
edges. Handle them carefully to
avoid possible severe injury. Be-
fore putting the wheel into place, be
sure that there is nothing on the
hub or wheel (such as mud, tar,
gravel, etc.) that interferes with the
wheel from fitting solidly against
the hub. If there is, remove it. If
there is not good contact on the
mounting surface between the
wheelandhub,thewheelnutscould
come loose and cause the loss of a
wheel.Lossofawheelmayresultin
loss of control of the vehicle. This
may cause serious injury or death.
D060H01L
To reinstall the wheel cover, hold it on
the wheel and put the wheel nuts on
the studs and tighten them finger tight.
The nuts should be installed with their
small diameter ends directed inward.
Jigglethetiretobesureitiscompletely
seated, then tighten the nuts with your
fingers again.
D060G02L
Product Specification
Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Grandeur |
Document File Type | |
Copyright | Attribution Non-commercial |