6-
22 DO-IT-YOURSELF MAINTENANCE
strument panel junction box you will
find a list showing the circuits pro-
tected by each fuse.
If any of your car's lights or other
electrical accessories stop working, a
blown fuse could be the reason. If the
fuse has burned out, you will see that
the metal strip inside the fuse has
burned through. If you suspect a blown
fuse, follow this procedure:
Good
Burned out
1.
2.
Turn off the ignition and all other
switches.
HXGS416
G200B02L
4.
Replace the blown fuse by press-
ing a new fuse of the same rating
into place. The fuse should be a
snug fit. If it is not, have the fuse
clip repaired or replaced by a
Hyundai dealer. If you do not have
a spare fuse, you may be able to
borrow a fuse of the same or lower
rating from an accessory you can
temporarily get along without (the
radio or cigarette lighter, for ex-
ample). Always remember to re-
place the borrowed fuse.
Open the instrument panel junction
box and examine each fuse. Re-
move each fuse by pulling it toward
you (a small "fuse puller" tool is
contained in the fuse box to sim-
plify this operation).
Be sure to check all other fuses
even if you find one that appears to
have burned out.
!
CAUTION:
A burned-out fuse indicates that
there is a problem in the electrical
circuit. If you replace a fuse and it
blows as soon as the accessory is
turned on, the problem is serious
and should be referred to a
Hyundai dealer for diagnosis and
repair. Never replace a fuse with
anything except a fuse with the
same or a lower amperage rating.
A higher capacity fuse could cause
damage and create a fire hazard.
3.
NOTE:
See page 6-34 for the junction box
descriptions.
| Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grandeur |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)