2004 Hyundai Grandeur Owners Manual

DO-IT-YOURSELF MAINTENANCE   6- 25
Before performing aiming adjustment,
make sure  of the following.
7. Adjust each  cut-off line of  the low
beam  to  the  parallel  line  with  a
phillips  screwdriver   -  VERTICAL
AIMING.
8. Adjust each  cut-off line of  the low
beam to   each  vertical line with  a
phillips  screwdriver  -   HORIZON-
TAL AIMING.
1. Adjust headlights so that main axis
of light  is parallel to  center line  of
the body  and is aligned with  point
"P" shown  in the illustration.
2. Dotted lines in the illustration show
the center  of headlights.
1.
2.
Keep all tires inflated to the correct
pressure.
Place the  vehicle on  level ground
and press the front  bumper & rear
bumper down several times. Place
the  vehicle at  a  distance  of  3 m
SPECIFICATIONS:
(118
in.) from  the test wall.
G290B02L-GAT
Adjustment After Headlight As-
sembly Replacement
"H"
Horizontal center line of headlights
from ground
General type:  634 mm (24.96  in.)
HID type:  628 mm (24.72  in.)
3.
See  that  the vehicle  is  unloaded
(except  for  full  levels  of  coolant,
engine oil and fuel, and  spare tire,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
Clean  the  head  light  lenses  and
turn on the headlights (low  beam).
Open the  hood.
Draw the vertical  line (through the
center of  each headlight)  and the
horizontal line  (through the center
of  each headlight)  on  the  aiming
screen.
Vertical
line
30
mm
Horizontal line
W
"W"
Distance  between each  headlight
center: 1,240  mm (48.8 in.)
"P"
4.
H
5.
6.
Cut-off line
L
"L"
Distance  between  the  headlights
and  the  wall   that  the  lights  are
tested against : 3,000 mm (118.11
in.)
H
Ground line
G290B01B
If  the   vehicle  has  had   front  body
repair  and  the   headlight  assembly
has been replaced, the headlight aim-
ing should be checked using an  aim-
ing  screen as  shown in  the  illustra-
tion.  Turn  on  the  headlight  switch.
(Low Beam  Position)
And then, draw a parallel line at 30
mm (1.18 in.)  under the horizontal
line.
Product Specification
Categories Hyundai Manuals, Hyundai Grandeur Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 235 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Grandeur
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field