Possible displays
3.
Select "Service" and press the controller.
4.
Select "Service requirements" and press
the controller.
1
2
Oil level OK
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
5.
Select "Engine oil level" and press the con-
troller. The oil level is displayed.
5
minutes while the car is on the move.
In order to exit from the display immediately:
3
4
Oil level down to minimum:
Add 1.1 US quarts/1 liter of engine oil as
soon as possible, refer also to Adding
engine oil.
Select
and press the controller.
Possible messages
>
>
"Engine oil level O.K."
Oil level is too high.
"No measured value available: Updating
engine oil level measurement..."
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
The engine oil level is measured. This can
take about 3 minutes if the car is at a stand-
still on a level surface and the engine is run-
ning, and about 5 minutes while the car is on
the move.
5
The oil level sensor is defective.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer >
to page 185. Have the system checked as
soon as possible.
"Oil level at the minimum! Refill with 1 quart
engine oil"
Add engine oil as soon as possible, but no
more than 1.1 US quarts/1 liter, refer also to
Adding engine oil below.
Display via iDrive
iDrive concept, refer to page 16.
>
"Engine oil level too high"
1.
Press the
This opens the start menu.
button.
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
2.
Press the controller to open the menu.
182
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325i, BMW 330i, BMW E90 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)