To use the automatic function again, move the
selector lever to the right into position D.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb
needs to be replaced.
After switching off the ignition, make sure that
the roadside parking lamps are not switched
on.<
Overriding selector lever lock
You can manually override the selector lever
lock in case a defect occurs in which the selec-
tor lever remains in position P although the but-
ton on the selector lever is pressed:
1.
2.
Unclip the sleeve of the selector lever.
Signaling for a short time
Pull the sleeve up over the selector lever
until the sleeve is inside out.
Press and hold the lever as far as the resistance
point for as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
iDrive concept, refer to page 16.
1.
2.
3.
Open the start menu.
Press the controller to open the menu.
3.
Using the screwdriver from the onboard
tool kit, refer to page 187, hold down the red
lever and move the selector lever to the
desired position in the usual way.
Select "Vehicle settings" and press the
controller.
4.
Select "Lighting" and press the controller.
Turn signals/
headlamp flasher
5.
Select "Triple turn signal activation" and
press the controller.
Triple turn signaling is activated.
1
2
3
High beams
Headlamp flasher
Turn signals
Using turn signals
Press the lever beyond the resistance point.
53
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325i, BMW 330i, BMW E90 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)