ing visor remains open and must be closed by
hand.
2.
Insert the screwdriver into the openings on
each side to press the clips.
For information on convenient operation via the
remote control or door lock, refer to page 30
or 31.
Anti-trapping mechanism
If the glass sunroof encounters an obstruction
during closing from approximately the middle of
the opening in the roof, or during closing from
the raised position, the closing movement is
interrupted and the glass sunroof is opened
again slightly.
3.
4.
Remove the cover panel.
Insert the Allen wrench supplied with the
onboard tool kit, refer to page 187, into the
opening provided. Turn the glass sunroof in
the desired direction.
Despite the anti-trapping mechanism
check and clear the sunroof's travel path
prior to closing it, as the safety system might fail
to detect certain kinds of obstructions, such as
very thin objects, and the sunroof would con-
tinue closing.
Pressing the switch beyond the resistance
point and holding it there deactivates the anti-
trapping mechanism.<
Following interruptions in electrical
power supply
After a power failure, there is a possibility that
the glass sunroof can only be raised. The sys-
tem must be initialized. BMW recommends
having this work done by your BMW center.
5.
Reattach the cover for the interior lamps
and install the cover panel.
Manually opening and closing
In the event of an electrical malfunction, you can
move the glass sunroof manually:
1.
Unclip the front of the cover for the interior
lamps using the screwdriver from the
onboard tool kit, refer to page 187.
37
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325i, BMW 330i, BMW E90 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)