To set a compass zone, press the adjustment
button on the bottom of the interior rearview
mirror with a pointed object, such as a pen, for
approx. 3-4 seconds. The number of the com-
pass zone set is shown in the display.
Procedure
1.
Make sure that no large metal objects or
overhead power lines are in the vicinity of
your vehicle and that you have enough
space to drive in a circle.
To change the zone setting, press the adjust-
ment button repeatedly until the display shows
the number of the compass zone in which you
are currently driving:
2.
3.
Set the currently valid compass zone.
Press the adjustment button to call up C or
CAL. Then drive in one full circle at a speed
of no more than 4 mph or 7 km/h.
If calibration is successful, the C or CAL dis-
play is replaced by the cardinal directions.
The compass is operational again after approx.
10 seconds.
For information on the automatic dimming fea-
ture, refer to Interior and exterior mirrors, auto-
matic dimming feature, page 107.
Roller sun blinds*
Calibrating the digital compass
Rear window blind
The digital compass must be calibrated in the
following situations:
>
>
C or CAL is displayed.
The compass shows the wrong cardinal
direction.
>
>
The cardinal direction shown does not
change although the direction of travel
does.
Not all cardinal directions are shown.
Tap the button in the center console to raise or
lower the roller sun blind.
95
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325i, BMW 330i, BMW E90 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)