journey with great care, provided that local leg-
islation does not prohibit this.
Have work on the xenon lighting system
performed only by your BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high electrical voltages
present, there is a risk of potentially fatal acci-
dents if work is performed inappropriate.<
1
2
3
Cover for high-beam headlamp
Cover for low-beam headlamp
Turn signal
Parking lamps, roadside parking lamps
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
To remove the covers:
1.
Fold the respective wire bracket to the side,
see arrows.
Halogen lamps
2.
Flip open the cover and take it out of the
guide.
H7 bulb, 55 watts
Always wear gloves and eye protection;
the atmosphere within the H7 bulb is
pressurized. Otherwise there is a risk of injury if
the bulb is damaged.<
Follow the same steps in reverse order to reat-
tach the covers.
Access through the wheel well
There are separate headlamp covers for low-
beam headlamps and high-beam headlamps.
Only for low-beam headlamps and turn signals:
1.
2.
Turn the wheel inwards.
Be careful when installing the covers, as
otherwise leaks could occur and cause
damage to the headlamp system.<
Open the flap in the wheel well.
For checking and adjusting headlamp
aim, please contact your BMW center.<
Access to the lamps
The high-beam headlamp can be accessed
from the engine compartment, whereas the
low-beam headlamp is accessed through a flap
in the wheel well.
Changing low-beam and high-beam
bulbs
1.
Remove the relevant cover for the head-
lamp.
2.
Disconnect the plug from the lamp.
188
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG
Product Specification
Categories | BMW 3-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 325i, BMW 330i, BMW E90 |
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |