3
WHAT TO DO IN AN EMERGENCY
8
D060F02E-AAT
5. Raising the Car
D060G02Y-AAT
6. Changing Wheels
!
WARNING:
Do not get under the car when it is
supported by the jack! This is very
dangerous as the jack could fall
and cause serious injury or death.
No one should stay in the car while
the jack is being used.
Wrench bar
Wheel nut wrench
D060F01TG
D060G01TG
After inserting a wrench bar into the
wheelnutwrench,installthewrenchbar
into the jack as shown in the drawing.
To raise the vehicle, turn the wheel nut
wrench clockwise. As the jack begins
to raise the vehicle, double check that
itisproperlypositionedandwillnotslip.
If the jack is on soft ground or sand,
place a board, brick, flat stone or other
object under the base of the jack to
keep it from sinking.
Raise the car high enough so that the
fullyinflatedsparetirecanbeinstalled.
To do this, you will need more ground
clearance than is required to remove
the flat tire.
Use the wrench to loosen the wheel
nuts, then remove them with your fin-
gers. Slide the wheel off the studs and
lay it flat so it cannot roll away. To put
thewheelonthehub,pickupthespare
tire,lineuptheholeswiththestudsand
slide the wheel onto them. If this is
difficult, tip the wheel slightly and get
the top hole in the wheel lined up with
thetopstud.Thenjigglethewheelback
andforthuntilthewheelcanbeslidover
the other studs.
| Categories | Hyundai Manuals, Hyundai Azera Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Azera |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)