DO-IT-YOURSELFMAINTENANCE
6
27
G290B01TG-GAT
Adjustment After Headlight As-
sembly Replacement
Right-Hand Drive (Low Beam)
SPECIFICATION:
Vertical
line
"P"
"H"
Horizontal center line of headlights
from ground;
Low Beam : 691 mm (27.2 in.)
High Beam : 680 mm (26.77 in.)
Horizontal line
W
Left-Hand Drive (Low Beam)
Vertical
Horizontal line
line
30 mm
30 mm
W
H
"P"
Cut-off line
H
"W"
Distance between each headlight cen-
ter;
H
Ground line
Cut-off line
L
G290B01TG-R
Low Beam : 1,350 mm (53.14 in.)
High Beam : 1,080 mm (42.51 in.)
L
Ground line
H
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
be checked using the aiming screen
as shown in the illustration. Turn on
the headlight switch (Low Beam Posi-
tion or High Beam Position).
G290B01TG
"L"
Left-Hand Drive (High Beam)
Vertical
line
Distance between the headlights and
the wall that the lights are tested
against: 3,000 mm (118.11 in.)
Horizontal line
3
0 mm
45
mm
1.
Adjust headlights so that main axis
of light is parallel to the center line
of the body and is aligned with
point "P" shown in the illustration.
H
90
mm
L
Ground line
H
2. Dotted lines in the illustration show
the center of the headlights.
G290B02TG
| Categories | Hyundai Manuals, Hyundai Azera Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Azera |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)