Wiper Blades
WIPER BLADE REPLACEMENT
Rear wiper blades
Wiper Blades
Front wiper blades
LO
CK
LOCK
H2459
Lift the wiper arm away from the windshield.
Disconnect the blade by pushing the locking tab
(see inset in illustration) to the unlock position
and slide upward.
H2595
With the spare wheel removed from the
taildoor, lift the wiper arm away from the rear
screen. Pivot the blade assembly away from the
arm (as arrowed), levering against resistance,
until the two retaining lugs detach from their
slots at the end of the arm. Carefully replace the
arm to its stowed position.
Fitting a replacement blade is a reversal of this
process. Check that the blade is securely locked
before returning the wiper assembly to the
windshield.
Only fit replacement wiper blades that are
identical to the original specification.
To replace, position the wiper arm into the
aperture in the middle of the blade assembly,
line up the retaining lugs with the
corresponding slots in the wiper arm and push
firmly into position until the blade clips into
place.
Grease, silicone and petrol based products
impair the blade's wiping capability. Wash the
wiper blades in warm soapy water and
periodically check their condition.
If signs of hardness or cracking in the rubber
are found, or if the wipers leave streaks or
unwiped areas on the windshield during use,
then the wiper blades should be replaced.
Clean the windshield regularly with an approved
glass cleaner and ensure the screen is
thoroughly cleaned before fitting replacement
wiper blades.
192
Product Specification
Categories | Land Rover, Land Rover Discovery |
---|---|
Tags | Land Rover |
Model Year | 2005 |
Download File |
|
Language | English |
Product Name | Discovery |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |