Safety belt reminder for front seats
Temperature distribution
The indicator lamp flashes or lights up.
In addition, a signal sounds. Please
make sure that the safety belts are
positioned correctly.
The heating action in the seat cushion and
backrest can be distributed in different ways.
iDrive, for principle details, refer to page 16.
1.
Press the
menu.
button to open the start
The safety belt reminder is active at speeds
above approx. 5 mph/8 km/h. It can also be acti-
vated if objects are placed on the passenger's
seat.
2.
3.
Move the controller toward "Climate".
If need be, select the
symbol and press
the controller to switch to the second page
of the menu.
Damage to safety belts
In case of strain due to an accident or
damage, replace the belt system includ-
ing the safety belt tensioners and have the belt
anchor points checked. Only have this work
carried out at a BMW center or at a workshop
that works according to BMW repair proce-
dures with correspondingly trained personnel.
Otherwise, correct operation of this safety
equipment is not guaranteed.<
4.
5.
Select "Seat temp." and press the control-
ler.
Heated seats*
Select "Left" or "Right" and press the con-
troller.
Front
The temperature setting progresses one step
through its control sequence each time you
press the button.
6.
Turn to adjust the temperature distribution
in the seat cushion and backrest and press
the controller.
The maximum temperature is supplied when
three lights are lit.
The setting is stored for the remote control cur-
rently in use.
To switch off:
Press and hold the button.
49
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)