Maintaining speed, storing, and
decelerating
lever until you have reached your desired
speed:
Pull the lever, arrow 2:
Functions in the same way as 1, except that the
vehicle speed is decreased.
> Press or pull the lever up to the resis-
tance point again: the pointer slowly
moves.
>
Press or pull the lever past the resis-
tance point again: the pointer jumps to
the next multiple of 5 mph or 10 km/h
and then further, as long as the lever is
held.
Interrupting the cruise control
Briefly press the lever up or down, arrow 3.
In addition, cruise control is interrupted auto-
matically:
3.
Press the button 4 for approx. 3 seconds.
The stored desired speed is indicated by a
mark 6.
>
>
when you apply pressure to the brake pedal
when you shift the automatic transmission
into position N
If six desired speeds have already been stored,
please delete at least one of them before adding
another.
>
when the DSC control is operative
Resuming stored speed
Briefly press the button 4:
The vehicle accelerates back to and maintains
the stored speed.
While driving
1.
Press, arrow 1, or pull, arrow 2, the lever
past the resistance point.
2.
Press the button 4 for approx. 3 seconds.
The current speed is applied as the desired
speed and displayed with 6.
Displays in speedometer
If all of the marks 6 flash twice, this indicates
that six desired speeds have already been
stored. You must then delete at least one of
them before adding another.
Deleting desired speeds
1.
Select corresponding desired speed 6,
refer to section below.
5
6
Pointer for stored speed
2.
Press button 4 for approx. 3 seconds.
>
>
Cruise control activated
Cruise control deactivated
Activating multilevel preset mode
Mark for stored desired speed in the multi-
level function
Press, arrow 1, or pull, arrow 2, the lever past
the resistance point.
The current driving speed is maintained, stored
and displayed by the pointer 5.
Storing desired speeds
With vehicle stationary
Selecting desired speed
1.
2.
Switch on the ignition.
Press, arrow 1, or pull, arrow 2, the lever past
the resistance point:
The next desired speed is selected.
Press, arrow 1, or pull, arrow 2, the lever
past the resistance point:
Now you can move the pointer 5 with the
68
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)