Unlocking safety belt
LATCH child-restraint fixing system*
1.
2.
3.
Open the belt buckle.
LATCH: Lower Anchor and Tethers for CHil-
dren.
Remove the child restraint system.
To attach a LATCH child's seat, follow the
operating and safety instructions of the
child's seat manufacturer.<
Allow the belt webbing to be pulled in com-
pletely.
Child restraint system with tether strap
If the vehicle is equipped with power seats in
the rear, return these to their standard adjust-
ment setting before using a LATCH child's seat,
refer to page 45.
Rear seats
There are three additional mounting points for
child restraint systems with a tether strap, refer
to arrows.
Routing of the tether strap
The mountings for the LATCH child-restraint
fixing system are located at the points marked
with the arrows. They are not visible from the
outside.
Before attaching the LATCH child's seat, pull
the belt away from the region of the child-
restraint fixing system.
Installation guide
The installation guide makes it easier to install
the LATCH child's seat and at the same time
protects the surface of the seats.
Fold upward before using the mounting points.
1.
2.
Push the head restraint upward.
Guide the tether strap through the bracket
of the head restraint.
The installation guide is available at your
BMW center. Always observe all instruc-
tions for operation and use provided by the
manufacturer in the installation guide.<
3.
4.
Slide the head restraint into the bottom
position.
Hook in the tether strap on the mounting
point.
Firmly press the installation guide into the gap
between the upholstery on seat cushion and
backrest, continuing until the two funnel-
shaped guides snap into place in the LATCH
child-restraint fixing system in the seat.
55
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG
Product Specification
Categories | BMW 7-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |