Controls in detail
Automatic transmission
Shifting procedure
G
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Warning!
The automatic transmission selects indi-
vidual gears automatically, depending on:
It is dangerous to shift the gear selector
lever out of park position P or neutral
position N if the engine speed is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally and when your right
foot is firmly on the brake pedal.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
ț
gear selector lever position D
(୴ page 186) with gear ranges
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
(୴ page 189)
ț
the selected program mode:
(C/S) (୴ page 190)
When the gear selector lever is in drive
position D, you can influence transmission
shifting by:
or
(M/C/S) (E 63 AMG only)
(୴ page 194)
ț
ț
limiting the gear range
changing gears manually
An additional indication of the current gear
selector lever position can be found on the
cover of the shifting-gate.
ț
ț
the position of the accelerator pedal
(୴ page 188)
the vehicle speed
The indicators come on when you activate
a switch (e.g. unlocking the vehicle or
opening a door) and go out after approxi-
mately 15 minutes.
185
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E320 BlueTec, Mercedes-Benz E55 AMG, Mercedes-Benz E550, Mercedes-Benz W211 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
lost manual,
can i download it please?
great car,but i lost manual and need one